creality_k1c
Differences
This shows you the differences between two versions of the page.
| Both sides previous revision Previous revision | |||
|
creality_k1c [2024/08/28 19:02] neil |
creality_k1c [2024/08/28 19:10] (current) neil |
||
|---|---|---|---|
| Line 1: | Line 1: | ||
| ====== Creality K1C ====== | ====== Creality K1C ====== | ||
| - | This is our newest 3D printer. It's wifi based. It's a red and glass enclosed cube printer. Located in the corner of the [[Hack space]]. Purchased [[May 2024]]. | + | This is our newest 3D printer. A [[https://store.creality.com/uk/products/k1c-3d-printer|Creality K1C 3D printer]]. It's wifi based. It's a red and glass enclosed cube printer. Located in the corner of the [[Hack space]]. Purchased [[May 2024]]. |
| ===== Specifications ===== | ===== Specifications ===== | ||
| - | To do: print specs | + | |
| + | ^Printing Technology|FDM^Leveling Mode|Hands-free auto leveling| | ||
| + | ^Build Volume|220*220*250mm^File Transfer|USB drive, WiFi| | ||
| + | ^Printing Speed|≤600mm/s^Acceleration|≤20000mm/s²| | ||
| + | ^Input Shaping|Yes^Printing Accuracy|100±0.1mm| | ||
| + | ^Layer Height|0.1-0.35mm^Extruder|Clog-free direct drive extruder| | ||
| + | ^Filament Diameter|1.75mm^Nozzle Diameter|0.4mm| | ||
| + | ^Nozzle Temperature|≤300℃^File Formats for Slicing|STL, OBJ, 3MF| | ||
| + | ^Printable File Format|G-Code^Heatbed Temperature|≤100℃| | ||
| + | ^Slicing Software|Creality Print, Cura 5.0 and later version^Build Surface|PEI flexible build plate| | ||
| + | ^Supported Filaments|ABS, PLA, PETG, PET, TPU, PA, ABS, ASA, PC, PLA-CF, PA-CF, PET-CF||| | ||
| ===== Instructions ===== | ===== Instructions ===== | ||
creality_k1c.1724871763.txt.gz · Last modified: 2024/08/28 19:02 by neil
Page Tools
Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Share Alike 4.0 International
