creality_k1c
Table of Contents
Creality K1C
This is our newest 3D printer. A Creality K1C 3D printer. It's wifi based. It's a red and glass enclosed cube printer. Located in the corner of the Hack space. Purchased May 2024.
Specifications
| Printing Technology | FDM | Leveling Mode | Hands-free auto leveling |
|---|---|---|---|
| Build Volume | 220*220*250mm | File Transfer | USB drive, WiFi |
| Printing Speed | ≤600mm/s | Acceleration | ≤20000mm/s² |
| Input Shaping | Yes | Printing Accuracy | 100±0.1mm |
| Layer Height | 0.1-0.35mm | Extruder | Clog-free direct drive extruder |
| Filament Diameter | 1.75mm | Nozzle Diameter | 0.4mm |
| Nozzle Temperature | ≤300℃ | File Formats for Slicing | STL, OBJ, 3MF |
| Printable File Format | G-Code | Heatbed Temperature | ≤100℃ |
| Slicing Software | Creality Print, Cura 5.0 and later version | Build Surface | PEI flexible build plate |
| Supported Filaments | ABS, PLA, PETG, PET, TPU, PA, ABS, ASA, PC, PLA-CF, PA-CF, PET-CF | ||
Instructions
- PC3 is set up with the Creality Print software that lets you convert STL or model files (downloaded from printables.com for example) to printable G-code. You can also install it on your own PC and scan the network to detect the printer. The Creality software will estimate the amount of filament required for each print in grams.
Costs
- It's approximately £20 per kg of filament. So, an average 30g print is roughly 60p (plus running/maintenance costs).
Back to 3D Printing
creality_k1c.txt · Last modified: 2024/08/28 19:10 by neil
Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Share Alike 4.0 International
