creality_k1c
Differences
This shows you the differences between two versions of the page.
| Both sides previous revision Previous revision Next revision | Previous revision | ||
|
creality_k1c [2024/08/28 19:58] neil |
creality_k1c [2024/08/28 20:10] (current) neil |
||
|---|---|---|---|
| Line 1: | Line 1: | ||
| ====== Creality K1C ====== | ====== Creality K1C ====== | ||
| - | This is our newest 3D printer. It's wifi based. It's a red and glass enclosed cube printer. Located in the corner of the [[Hack space]]. Purchased [[May 2024]]. | + | This is our newest 3D printer. A [[https://store.creality.com/uk/products/k1c-3d-printer|Creality K1C 3D printer]]. It's wifi based. It's a red and glass enclosed cube printer. Located in the corner of the [[Hack space]]. Purchased [[May 2024]]. |
| ===== Specifications ===== | ===== Specifications ===== | ||
| - | To do: print specs | + | |
| + | ^Printing Technology|FDM^Leveling Mode|Hands-free auto leveling| | ||
| + | ^Build Volume|220*220*250mm^File Transfer|USB drive, WiFi| | ||
| + | ^Printing Speed|≤600mm/s^Acceleration|≤20000mm/s²| | ||
| + | ^Input Shaping|Yes^Printing Accuracy|100±0.1mm| | ||
| + | ^Layer Height|0.1-0.35mm^Extruder|Clog-free direct drive extruder| | ||
| + | ^Filament Diameter|1.75mm^Nozzle Diameter|0.4mm| | ||
| + | ^Nozzle Temperature|≤300℃^File Formats for Slicing|STL, OBJ, 3MF| | ||
| + | ^Printable File Format|G-Code^Heatbed Temperature|≤100℃| | ||
| + | ^Slicing Software|Creality Print, Cura 5.0 and later version^Build Surface|PEI flexible build plate| | ||
| + | ^Supported Filaments|ABS, PLA, PETG, PET, TPU, PA, ABS, ASA, PC, PLA-CF, PA-CF, PET-CF||| | ||
| ===== Instructions ===== | ===== Instructions ===== | ||
| - | To do: how to print instructions | + | * [[Gaming PCs|PC3]] is set up with the [[https://www.creality.com/pages/download-software|Creality Print]] software that lets you convert STL or model files (downloaded from [[https://www.printables.com/|printables.com]] for example) to printable [[https://en.wikipedia.org/wiki/G-code|G-code]]. You can also install it on your own PC and scan the network to detect the printer. The Creality software will estimate the amount of filament required for each print in grams. |
| + | |||
| + | ====== Costs ====== | ||
| + | * It's approximately £20 per kg of filament. So, an average 30g print is roughly 60p (plus running/maintenance costs). | ||
| Back to [[3D Printing]] | Back to [[3D Printing]] | ||
creality_k1c.1724871484.txt.gz · Last modified: 2024/08/28 19:58 by neil
Page Tools
Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Share Alike 4.0 International
