Table of Contents

Creality K1C
- Specifications
- Instructions
Costs

Creality K1C

This is our newest 3D printer. A Creality K1C 3D printer. It's wifi based. It's a red and glass enclosed cube printer. Located in the corner of the Hack space. Purchased May 2024.

Specifications

Printing Technology	FDM	Leveling Mode	Hands-free auto leveling
Build Volume	220220250mm	File Transfer	USB drive, WiFi
Printing Speed	≤600mm/s	Acceleration	≤20000mm/s²
Input Shaping	Yes	Printing Accuracy	100±0.1mm
Layer Height	0.1-0.35mm	Extruder	Clog-free direct drive extruder
Filament Diameter	1.75mm	Nozzle Diameter	0.4mm
Nozzle Temperature	≤300℃	File Formats for Slicing	STL, OBJ, 3MF
Printable File Format	G-Code	Heatbed Temperature	≤100℃
Slicing Software	Creality Print, Cura 5.0 and later version	Build Surface	PEI flexible build plate
Supported Filaments	ABS, PLA, PETG, PET, TPU, PA, ABS, ASA, PC, PLA-CF, PA-CF, PET-CF

Instructions

PC3 is set up with the Creality Print software that lets you convert STL or model files (downloaded from printables.com for example) to printable G-code. You can also install it on your own PC and scan the network to detect the printer. The Creality software will estimate the amount of filament required for each print in grams.

Costs

It's approximately £20 per kg of filament. So, an average 30g print is roughly 60p (plus running/maintenance costs).

Back to 3D Printing